SMEG Appliance Repairs In Dublin & North Wicklow
Fast, Reliable SMEG Appliance Repairs.
Authorised SMEG appliance repairs across Dublin and North Wicklow. Same or next-day service from experienced local engineers.
Rated 5* from 100+ Google Reviews
Authorised SMEG Repairer
Available across Dublin & North Wicklow.
15+
Years of appliance repair experience
Authorised SMEG appliance repairs
Does Your SMEG Appliance Need A Repair Or Service?
From electrical faults and error codes to heating problems, leaks and appliances that simply won’t start, we provide authorised SMEG repairs across Dublin & North Wicklow. Our qualified and fully insured engineers work across a wide range of SMEG appliances, with same or next-day appointments whenever possible
Authorised SMEG repairer
Approved specialist repair expertise.
Same or next-day service
Fast appointments where available.
Qualified & fully insured
Professional and safety-conscious repairs.
Multiple appliance types
SMEG ovens, washers, dryers and more.
Common faults repaired
Leaks, drainage, noise & error codes.
Clear, practical advice
Honest guidance before work begins.
AUTHORISED SMEG REPAIRS
SMEG Appliances We Repair.
SMEG Washing Machines
SMEG Dish Washers
SMEG Ovens & Cookers
SMEG Tumble Dryers
SMEG Washer Dryers
Got a different SMEG appliance?
We can also repair other SMEG appliances - contact us to find out more.
Common SMEG Appliance Faults
Common SMEG Appliance Faults We Can Help With.
Below are some of the most common problems behind washing machine repair callouts in Dublin & North Wicklow. Whatever the symptom, we’ll diagnose the cause clearly and explain the best solution for you.
Drum Not Spinning
Carbon brushes wear down or the door interlock fails, leaving the drum turning slowly or not at all.
Won't Drain
A blocked pump filter or kinked drain hose is the most common cause of water left sitting in the drum.
Excessive Vibration
Worn suspension springs or dampers let the drum bang against the casing during the spin cycle.
Door Won't Unlock
A faulty door interlock mechanism can trap laundry inside even after the cycle finishes.
Leaking From The Base
Worn door seals or a failing pump housing are frequent culprits behind water pooling underneath.
Not Filling With Water
A faulty inlet valve or blocked filter can stop water reaching the drum at the start of a cycle.
Oven Not Heating
Oven fails to reach temperature.
Uneven Cooking
A failing fan motor or heating element can leave hot spots and cold spots across the oven cavity.
Door Won't Seal Properly
A worn or damaged door seal lets heat escape, driving up cook times and energy use.
Grill Not Working
A blown grill element is a common fault, often independent of the main oven heating circuit.
Display / Controls Unresponsive
A fault in the control board can leave the digital display frozen or buttons unresponsive.
Interior Light Not Working
A blown bulb or faulty light switch is usually behind a dark oven cavity during use.
Not Drying Properly
A blocked condenser or faulty heating element can leave laundry damp at the end of the cycle.
Stuck Mid Cycle
A fault in the cycle sensor or control board can cause the machine to stall between wash and dry phases.
Excessive Noise
Worn drum bearings often cause a loud rumbling or grinding sound in the drying phase.
Condensation Build Up
A blocked condenser unit can cause excess moisture to collect inside the machine or on the door glass.
Overheating During Drying
A faulty thermostat can cause the drying cycle to run too hot, risking damage to fabrics.
Won't Switch From Wash To Dry
A fault in the cycle timer or selector can prevent the machine progressing to the drying stage.
Unpleasant smells
Detergent residue and biofilm can build up around the seal, drawer and drum after frequent cool washes.
Dishes Coming Out Dirty
A blocked spray arm or worn wash pump can leave dishes with visible residue after a full cycle.
Not Draining
A clogged filter or faulty drain pump is the usual cause of standing water at the end of a cycle.
Door Latch Won't Shut
A worn door catch or faulty interlock switch can stop the cycle from starting at all.
Leaking From The Door
A perished door seal is a common cause of water escaping onto the kitchen floor during a wash.
Cycle Taking Too Long
A struggling heating element can cause the machine to repeatedly attempt to reach temperature, extending run times.
Not Heating Up
A blown thermal fuse or failing heating element can leave the drum turning with no warm air.
Clothes Not Drying Fully
A blocked lint filter or condenser restricts airflow, reducing drying efficiency.
Drum Not Turning
A snapped drive belt is one of the most common reasons the drum stops rotating.
Excessive Noise
Worn drum bearings or a failing belt often cause squealing or thumping during operation.
Not Switching On
A faulty door switch or blown thermal fuse can prevent the dryer from starting at all.
Overheating Or Burning Smell
A blocked vent or failing thermostat can cause the unit to run hotter than it should.
Can't see your appliance problem listed? We repair many other faults too.
Call 086 821 3041
How our SMEG appliance repair service works
A straight forward repair service from start to finish.
We keep the process simple, explain what we find clearly and make sure you understand the options before any additional work is carried out.
Step 01
Book Your Repair Callout
Tell us what's happening, where you're located and the SMEG appliance model if known. We'll arrange a suitable appointment and let you know what information to have ready.
Step 02
We'll Diagnose The Fault
A qualified repair specialist will inspect the machine, identify the likely cause and explain the recommended repair clearly to you before proceeding.
Step 03
Repair Or Clear Next Steps
Where practical, the repair will be carried out during the visit. If a part is required, we'll explain what's needed and agree the next step with you.
Clear diagnosis. Practical advice. No additional work without your approval.
Customer Reviews
Trusted By Households Across Dublin & North Wicklow.
Professional, reliable appliance repairs – recommended by customers throughout the areas we serve.
All reviews independently posted on Google
We believe appliance repairs should be straightforward. We'll diagnose the fault clearly, explain your options and carry out the work once you're happy to proceed.
Ronan
National Appliance Repairs
Clear, honest advice
No Work begins without your approval
Book A Callout
Tell us what's gone wrong with your SMEG appliance.
Send us a few details about your SMEG appliance and the problem you’re experiencing. We’ll get back to arrange a suitable callout and let you know what happens next.
Same Or Next Day Service
Where appointment availability allows
Qualified & Fully Insured
Professional Domestic Appliance Repairs
Prefer To Speak To Us?
Call 086 821 3041
Handy To Know
Wherever possible, have the appliance brand, model number and any error code ready.
Request A Repair Callout
Complete the form below and we’ll get back to you to confirm availability.
Your details are only used to respond to your request.
Frequently Asked Questions
Questions About SMEG Appliance Repairs?
We’re here to make appliance repairs simple and stress-free. Find answers to common questions here, or get in touch with our friendly team for personalised support.
Still Need Some Help?
Call Us: 086 821 3041
Do you repair SMEG appliances?
Yes! We’re experienced with the full SMEG range, including ovens, cookers, dishwashers, washing machines and more.
Our engineers are familiar with SMEG’s parts and common fault patterns, so repairs are diagnosed quickly and correctly the first time.
Are SMEG appliances expensive to repair?
Not necessarily.
While SMEG parts can cost more than budget brands, most faults such as heating elements, door seals or control boards are straightforward and affordable to fix. We’ll always give you an upfront price before any work begins, so there are no surprises.
Should I repair or replace my SMEG appliance?
In most cases, repair is the better option. SMEG appliances are built to last, and a targeted repair is far cheaper than replacing the unit.
We’ll give you an honest recommendation based on the appliance’s age, the fault, and the cost of parts, so you can make the right call.
How long does a SMEG appliance repair take?
Most repairs are completed in a single visit, as our engineers carry a wide range of common SMEG parts with them. Where a specific part needs to be ordered, we’ll let you know the expected turnaround before booking the follow-up visit.
Do you use genuine SMEG parts?
Yes, we use genuine or manufacturer-approved parts wherever possible to make sure your appliance performs as intended and your warranty status isn’t affected.
What are the most common SMEG appliance faults?
The most common issues we see are ovens not heating properly, dishwashers failing to drain, washing machine drums not spinning, and unusual noises or smells during use. If you’re experiencing any of these, it’s best to get it looked at before the fault worsens.
Do you offer a warranty on SMEG repairs?
Yes, all our SMEG repairs are covered by a repair warranty, giving you peace of mind that the fix is built to last. If the same issue reoccurs within the warranty period, we’ll sort it at no extra cost.